SMC AW60
Products Description SMC AW60 pressure reducing valve optimizes the filtration design to effectively intercept impurities, oil mist and moisture while stabilizing the output pressure, ensuring that downstream pneumatic equipment is free from contamination. In pneumatic systems, the purity of...
Product Introduction
Products Description
SMC AW60 pressure reducing valve optimizes the filtration design to effectively intercept impurities, oil mist and moisture while stabilizing the output pressure, ensuring that downstream pneumatic equipment is free from contamination. In pneumatic systems, the purity of compressed air directly affects the performance and life of components.
SMC pressure reducing valve adopts a high-sensitivity diaphragm structure with an adjustment accuracy of ±0.01MPa. The optimized valve core design shortens the pressure adjustment response time by more than 30%, and the rotary locking mechanism prevents accidental adjustment to ensure stable set pressure.
parameter
|
Port Size |
3/4 1 |
|
Fluid |
Air |
|
Temperture |
-5 To 60℃ |
|
Bowl Material |
Polycarbonate |
|
Thread Type |
NPT / G / Rc |
|
Nominal Filtration Rating |
5μm |
|
Set Pressure |
0.05 To 0.85 Mpa |
|
Drain Capacity |
45CM³ |
|
Weight |
2KG |
SMC pressure reducing valve adopts the classic diaphragm pressure reducing principle. When the adjustment knob is rotated clockwise, the adjustment spring is compressed, pushing the diaphragm assembly downward. This action opens the valve core and the air flow flows from the inlet to the outlet. As the outlet pressure rises, the air pressure acts on the bottom of the diaphragm through the feedback hole. When it reaches a balance with the spring force, the valve core will automatically adjust the opening to maintain the set pressure.

The unique "pilot" structural design of the SMC AW60 pressure reducing valve controls large flow through small flow, achieving more precise pressure regulation and faster response speed. When the system pressure fluctuates, the diaphragm can quickly sense and adjust the valve core position to ensure stable output pressure.
Notes
- Installation direction: The filter module is installed vertically to ensure smooth sedimentation of the liquid.
- Lubrication recommendation: If lubrication is required, use ISO VG32 grade turbine oil No. 1.
- Maintenance cycle: It is recommended to check the seal status every 6 months.
- Pressure adjustment: The knob should be turned slowly during adjustment to avoid sudden changes in pressure.
Environmental protection: Avoid using in dusty and corrosive gas environments. If the gas source contains chemical corrosive substances, a Teflon-coated filter element must be used.
The integrated design of the SMC AW60 pressure reducing valve reduces the risk of leakage, and the flow channel optimization avoids pressure fluctuations. In pneumatic systems, compressed air often carries lubricating oil mist, and long-term accumulation will cause the pressure reducing valve to decrease in sensitivity. This model can be equipped with an oil mist separation module to remove 99% of the oil in the air, suitable for clean environments with oil-free requirements.
Hot Tags: smc aw60, China smc aw60 manufacturers, suppliers, factory, Yokogawa Others, Rosemount 65 Rtd, Rosemount 3144P Transmitter, 1151 Transmitter, Rosemount 2051cg, Honeywell Transmitter
Previous: OPTA2
Next: EFFEKTA EFGR850-48
Send Inquiry
You Might Also Like


