TL-2055 Test Lamp
video
TL-2055 Test Lamp

TL-2055 Test Lamp

◆Flame detectors that detect at 185-235 nm UV, near IR, wideband IR and 4.4 u IR radiation.
◆It is powered by a rechargeable, long-life, more capacity, “memory-free” nickel hydride battery pack.
◆Fire-Lite TL-2055 Portable, Explosion-Proof WideBand IR Test Lamp, for Testing FSC Model FS24X and FS18X Detectors.

Product Introduction

Products Description

 

TL-2055 Test Lamp is a flame detector that uses advanced multi-band infrared sensing technology. It can effectively distinguish between real flames and interference sources, quickly and accurately identify flames and trigger alarms, effectively prevent fire accidents, and significantly reduce false alarm rates.

Manufacturer

Honeywell

Product Name

Flame Detector Test Lamp

Manufacturer Part Number

TL-2055

Country of Origin

US

Indoor/Outdoor

Indoor , Outdoor

Features

Explosion Proof

TL-2055 Test Lamp

Advantages

  • 4-20mA output can be easily integrated into various fire alarm systems.
  • ≤3 seconds response time ensures that the alarm can be triggered at the beginning of the fire, buying valuable time for personnel evacuation and fire extinguishing.
  • -40°C to +70°C operating range, plus IP66 protection level, very durable in extreme environments such as oil platforms, chemical plants, cold storage.
  • Low power design with a static current of only 25mA, suitable for occasions that require long-term stable operation.

Functions

  • Accurately detect hydrocarbons (oil, natural gas, etc.) and non-hydrocarbon flames (such as alcohol, paper).
  • Self-diagnosis function regularly checks sensors and circuits to ensure that the device is always in the best condition.
  • If the lens is contaminated or the circuit is abnormal, a fault alarm signal will be triggered to facilitate maintenance.
  • Users can adjust the detection threshold according to the on-site environment to optimize performance.

Infrared spectroscopy analysis technology

When a flame burns, it releases infrared radiation of a specific wavelength (such as the 4.3μm CO₂ characteristic spectrum). Multiple IR sensors are built in to compare the environmental radiation with the flame characteristics, eliminate interference sources, and the microprocessor analyzes the signal strength and frequency. After confirming the flame, the alarm is triggered.

TL-2055 Test Lamp

Precautions

  • Avoid direct sunlight or high temperature heat source interference. It is recommended to install it 15-20 meters away from potential fire sources.
  • Dust or oil may affect the detection performance, and the optical window needs to be cleaned regularly.
  • It is recommended to perform a flame simulation test once a month to ensure that the system functions normally.
  • In hazardous areas (such as Zone 1/Zone 2), it must be installed strictly in accordance with ATEX specifications.
  • When connected to an existing fire protection system, it is necessary to check whether the output signal (relay/4-20mA) matches.

TL-2055 Test Lamp is mainly used for hydrocarbon fires. If you need to detect metal fires (such as magnesium and lithium), you must use an ultraviolet (UV) detector. Whether it is a high-risk industrial scenario or a conventional fire protection demand, it can provide efficient and stable protection.

Hot Tags: tl-2055 test lamp, China tl-2055 test lamp manufacturers, suppliers, factory, Honeywell DCS PLC, Honeywell, Honeywell FC IOTA R24

You Might Also Like

(0/10)

clearall